As a driver, does the glare of sunlight affect your car view? This mostly occurs during the summer season when sunlight is at its peak. The best solution to reduce this glare and improve vision to avoid any serious accidents is to do car window tinting. Tinting the windows of your car is a great way to reduce the glare of the sun and improve your visibility.
It also helps to protect the interior of your car from UV rays and also reduces any skin or eye infection. It is easy and can be done in just a few minutes. Below we’ll learn about how to tint car windows step by step, so go ahead with us!
What Is Car Window Tinting?
Car window tinting is the process of applying a thin layer of tint on glass. It’s darkness and the appearance of glass windows. This darkness protects your car interior, and you from the harmful UV rays that damage car interiors and enhance skin and eyesight issues. Additionally, it also provides some sort of protection and privacy for car drivers and others.
But most of the country’s car window tinting is considered illegal. Car or any vehicle owners can’t do window tinting 100%. They are allowed to do window tinting only 50% or less.
There are several reasons why car drivers should do car window tinting as per government-issued rules.
Sun protection: As mentioned above, it reduces harmful UV rays. It means that it provides sun protection to drivers.
Heat protection: Due to extra sunlight, the inside temperature of your car changes. It heats up. But due to window tinting, it provides heat protection that is good for drivers and others.
Privacy: It darkness, the view from outside, means whatever you’re doing inside your car nobody can’t view you while driving, unless they stick with the car and forcefully view inside.
Interior preservation: The car interior is very important for car owners as it demands costly repairs. So, due to this window tinting, a sort of relaxation appears for car drivers as their inside temperature is moderate and the interior is safe now.
Safety: It enhances shatter resistance in case of accidents, as the film holds shattered glass together.
Security: This security point is for thieves. Due to window tinting, it becomes harder for thieves to look inside your car and steal anything. It adds an extra layer of security of car drivers.
Aesthetics: Car window tinting is just slaying. It enhances the quality and appearance of cars and demands its aesthetic appeal.
Energy efficiency: it also reduces the efficiency of excessive air conditioning that contributes to fuel efficiency.
How To Do Car Window Tinting in Just 3 Simple Steps?
Car window tinting is a simple and quick way. Here are 3 simple steps for you:
1. Preparing Your windows
Prepare the environment: To start tinting car windows, it’s best practice to clean them in a clean and dry workplace. Because dust and dirt can affect tinting.
Remove stickers and adhesive things: Clean the windows by removing stickers, adhesive objects and obstructions outside and inside the cars and overall clean the car glass.
Clean windows with soap water or a razer blade: Use dishwasher detergent and hot water to clean the windows inside and outside properly. After that, use a razor blade to deeply rinse off all the dirt and grim.
Take a rag and dry the windows: Now take a clean rag and dry the windows properly. Lower the windows, and clean and dry the top of windows properly too, most cleaners don’t clean out this part.
Determine tinting adhesiveness: The tint has a peelable layer like a sticker before it is attached to the window. When working with the tint, look towards this side.
2. Cutting And Measuring Your Tint
Spray the outside of windows with soap water: Now spray the outside of the windows with soapy detergent in your spray bottle. This will temporarily adhere to the tinting, but it will be slippy at the time.
Place the tinting film on the outside of the window, to take its size: Now unroll the tinting, and place it on your car window. Make sure to take 2 to 3 inches extra from each edge. Also ensure that the tinting is by your side. Don’t peel off the liner, as you’re just taking measurements.
Cut a usable slab of tinting: As you have done, take extra inches of tinting film. There’s no need to take a tinting roller all the time. Use a knife or blade to cut it, to your measurable size and keep the roller side.
Spray the film with water: Once you cut down the tint film, spray the front of the tinting film with soap water so that it sticks to glass windows.
Cut the bottom and left edges of the window: Trace the edges of the windows with a knife across the tinting film. Trace it perfect line to make sure that tint fits well. After that, ensure that two edges fit perfectly, and the others are in square shape. When done cutting, discard the film away.
Shift the film 1″ towards the left edge: After cutting the first edge, you should push the tint toward this edge as well. This way, you will have put enough tint to cover every inch of the window.
Cut the right edge and then slide halfway back toward tints: Once you trim off one side’s outermost border, drawback halfway to the center of tinting where it is approximately one-half-inch on either side of the window.
Pull the film down about an inch so that the bottom edge is below the window: It would be nice if this were tinted because it will go in a door and give a better light seal. Squeeze it downwards then squeeze it back into place. In fact, you will do all this again for the top and bottom edges after accomplishing similar for the right and left sides.
Lower your window by ½” and then use its top end to cut out appropriate shapes: Finally, when it’s down use this upper part of a window as your reference point. Carefully slice until you reach the utmost position of a window with a precision knife.
Clean all the corners with a knife: When cutting the film, some extra inches of film are also added. Use the knife to cut this extra inch of film and clean it properly.
Realign your film with some excess on every edge: The cutting edges may not properly stick with the glass sometimes. Use soap water, remove the cutting edges a little bit, and spray the glass so that it sticks with it properly.
Use a hard card and heat gun to remove the bubbles: With the help of a hard card from the top to downward, remove all the air and bubbles. Use a heat gown parallel so that the film dries out properly and sticks to the glass.
3. Adhering The Tint
Peel off the window film: to adhere it more properly, peel the film one time and use a spray of soapy water to stick it with the film accurately. After the spray, stick the film with windows, and use a hard card and heat gun once again to properly adhere the tint with glass so that there’s no issue left behind.
Final inspection: Now take a final look at your work. Check from both inside and outside of the car so that if there are any imperfections you can remove them on time.
Tips For Keeping Car Windows Tinting In Best Possible Condition
After film installations, here’s what you need to do to keep it in the best possible conditions:
After installing the car windows tinting, don’t put water on it for at least a week.
Use window cleaner or tint solution to keep your windows in good condition.
Use a clean and soft rag to rinse any dust and rust accumulated on it.
Don’t use harsh and brittle sponges.
Make sure to park your windows inside the shade, to avoid UV rays.
Conclusion
Car window tinting is for essential car drivers to view clear views from the outside of the windows in order to escape from any damages. Car windows are similar to residential windows tinting. If you don’t want to do it yourself or take expert services on which type of tint is best suitable for your windows, you can call professionals. Like Tint on wheels in the United States provides the best services for tinting either home or any car vehicle. Consult with them, and schedule your ticket now!
